USD $4,006.78
Maiden drilling at Wilfred returned gold in both of the first two reverse-circulation holes.
Dalaroo Metals Limited (ASX:DAL) has reported high-grade gold from the first two holes of its maiden reverse-circulation drilling program at the Bondoukou Gold Ridge Project in Côte d’Ivoire.
The opening holes tested the Wilfred target from opposing directions along the approximately seven-kilometre Gold Ridge corridor. The strongest intersections were:
- 18 metres at 7.31 grams per tonne gold from 63 metres in BDRC002, including 12 metres at 8.66 grams per tonne from 69 metres and one metre at 15.90 grams per tonne from 78 metres
- 23 metres at 2.14 grams per tonne gold from surface in BDRC001, including 12 metres at 3.35 grams per tonne from seven metres and two metres at 7.43 grams per tonne from eight metres
- 16 metres at 1.46 grams per tonne gold from 113 metres in BDRC002, including one metre at 6.37 grams per tonne from 114 metres
The main BDRC002 interval represents about 132 gram-metres of downhole grade-thickness and occurs in strongly silicified volcaniclastic rocks with quartz-sulphide veining and pyrite. Dalaroo said this geological association would help guide the remaining orientation drilling.

All reported widths are downhole lengths. True widths, geometry and continuity are not yet known.
Nine holes totalling 1,750 metres had been completed by 3 October, with BDRC010 underway. The 24-hole, approximately 4,200-metre orientation phase forms part of a planned 102-hole, approximately 12,000-metre maiden program across the Wilfred, Mag and Ali targets. Assays from BDRC003 and BDRC004 are expected in early November, subject to laboratory turnaround and quality-control review.
Dalaroo Chief Executive Officer John Morgan:
This is the start we were hoping for. Our very first drill holes at Wilfred have delivered 18 metres at 7.31 grams per tonne gold, including 12 metres at 8.66 grams per tonne, with a second 16-metre zone deeper in the same hole and 23 metres of gold from surface in BDRC001. Hitting gold in both holes, from both directions, on the first drill holes ever drilled along the 7-kilometre Gold Ridge corridor is a very encouraging result for Dalaroo and our shareholders, and an excellent start to our drill program.
The quality of the main intersection stands out. The 18-metre zone in BDRC002 represents around 132 gram-metres of gold, and the higher-grade core of 12 metres at 8.66 grams per tonne sits within a broader mineralised envelope. Just as encouraging are the 23 metres of oxide gold from surface in BDRC001 and the second zone of 16 metres at 1.46 grams per tonne further down BDRC002. To see multiple mineralised zones on the very first holes gives us a strong platform to build on.
These results also support our targeting. Every stage of work at Gold Ridge has built on the last. It started with a great magnetic signature that lined up with artisanal gold workings. Good geological mapping followed, then strong soil sampling results across a 7-kilometre corridor, which were confirmed by our auger drilling. These first two holes have now strengthened that picture and indicate that our approach is putting the drill bit in the right places. This corridor has never been drilled before, and Dalaroo can earn up to an 80% interest in the Gold Ridge permit through our joint venture with Goldridge SARL. I would like to thank our team in Côte d’Ivoire, our joint venture partner and the local communities for their support in getting this program off to such a strong start.
It is early days, and the next results will tell us more about orientation, true width and continuity. But with the rig now running day and night, samples from the next two holes at the laboratory and 14 more holes to come in the orientation program, we look forward to regular news flow from the Bondoukou Gold Ridge Project. This first set of results covers only a small part of a 7-kilometre corridor, and with further drilling planned, it is the potential scale of Gold Ridge that excites us most.
